Orbiloc Service Kit
7,25 €
In stock
IN THE BOX
Orbiloc Battery Pack (2 x CR2032) | O-ring | Service Tool
The Orbiloc Service Kit includes a new battery pack and O-ring for you to maintain and prolong the life of your Orbiloc Safety Light.
The battery pack consist of 2 x CR2032 that provides up to 100 hours of steady-on or 250 hours of flashing light. Furthermore the Service Kit contain a service tool to make it easy to unscrew and tighten the base of the light, and an O-ring to ensure the light remains 100% waterproof.
COMPATIBLE PRODUCTS
The Orbiloc Service Kit offers an affordable and effective solution to keep your Orbiloc Safety Light functioning at its best. The kit includes a pre-wrapped battery pack with two CR2032 batteries, a lubricated O-ring, and a Service Tool for tightening and untightening your light. With this kit, your Orbiloc Safety Light continues to shine brightly for 100 hours in steady-on mode and 250 hours in flashing mode.
The O-ring plays a critical role in keeping the Orbiloc Safety Light waterproof, protecting it up to a depth of 100 meters. It’s essential to replace the O-ring each time you change the battery pack to maintain the light’s waterproof capabilities. This ensures your light stays safe and fully functional, whether you’re out in the rain or submerged in water.
If you frequently use your Orbiloc Safety Light in wet environments, such as SUP or kayaking, it’s important to lubricate the O-ring regularly. For those using the light in diving conditions, we recommend cleaning the O-ring before and after each dive and lubricating it before every dive. You can use the sealed silicone bag from the Service Kit to store silicone for O-ring lubrication.
When replacing the O-ring, be sure to place it carefully in the designated groove above the thread of the lens. This will ensure a secure seal and maintain the light’s waterproof integrity.
When changing the battery pack, make sure the + symbol faces down when inserting it into the base of the Orbiloc Safety Light.
For more detailed maintenance advice, read here. Keep your Orbiloc Safety Light in top condition with the Orbiloc Service Kit and enjoy long-lasting safety and visibility during your adventures.
Browse through these FAQs to find answers to commonly raised questions regarding the Orbiloc Service Kit. If you have general questions to our products, please go to our support FAQ page.
Why should I buy the Orbiloc Service Kit and not simply use 2 single batteries?
Basically, it does not matter where you get the batteries for the Orbiloc Safety Light but there are huge differences in quality.
Therefore, we recommend the original Orbiloc battery pack from the Service Kit.
Especially if your light is often in contact with water, it would make sense for you to purchase the Service Kit, as in that case we recommend that the O-ring is regularly lubricated and replaced every time you change the batteries. The O-ring included with the Service Kit comes in a small zip bag and you can use the excess silicone to lubricate the O-ring several times.
Note: Orbiloc can only guarantee the 5 km/3 mi visibility and the 100 to 250 h battery life when you use the original Orbiloc Battery Pack.
Can I use 2 single CR2032 batteries?
Yes, you can use two single CR2032 batteries.
When using two single CR2032 batteries the three battery springs in the base must be bent approx. 1 mm upwards to ensure flawless contact with the batteries.
Note: Orbiloc can only guarantee the 5 km/3 mi visibility and the 100 to 250 h battery life when you use the original Orbiloc Battery Pack.
Is the light rechargeable/can I use rechargeable batteries?
No, the Orbiloc Safety Light is not yet rechargeable by default. However, you can use rechargeable LIR2032 batteries.
When using two LIR2032 batteries the three battery springs in the base must be bent approx. 1 mm upwards to ensure flawless contact with the batteries.
Note: Orbiloc can only guarantee the 5 km/3 mi visibility and the 100–250 h battery life when you use the original Orbiloc Battery Pack.
Does the light tolerate salt water?
Yes, the light does tolerate salt water – even up to 100 meters depth. Please make sure, however, to rinse the light with fresh water while turning the Mode Selector Ring after the light was exposed to salt water. Please also refer to our blogpost: How to take care of your Orbiloc light after exposure to saltwater
How long does the battery last?
The battery lifetime is 100 hours when steady-on and 250 hours when flashing and the batteries are replaceable.
